Creo PTC Tutorials

Part Modeling in Creo Parametric

In this tutorial, we would be using Creo Parametric 4.0 to model the part.

A four bar linkage or a four bar mechanism is a mechanism which consists of four rigid bars.

We are going to model four links, and four cylinder bars to connect the links.

Crank is going to be the smallest link. The procedure of modeling the crank is same as that of the ground.

Now we are going to assemble all the links of the four bar linkage

In this tutorial we'll create pin connections for our four-bar linkage assembly.

By adding a motor the assembly would move itself according to the parameters we give.